4” Surface Demon™ Replacement Diamond Cup Wheels

Specially formulated Diamond Cup Wheels are sold individually to replace worn or damaged Diamond Cup Wheels on The Surface Demon™ Polish Prep Tool.

16” – 20” Surface Demon Polish Prep Tools require five Diamond Cup Wheels and Floating Head Assemblies.

*Surface Demon™ performs best when used with Malish Diamond Cup Wheels.

Request Information

4” Diamond Cup Wheel

Product No.Product DescriptionNumber of AssembliesUPCFits Block Diameter
5204BK4” Diamond Cup Wheel16-15129-52040-916", 17", 18", 19", 20"

PRODUCT VIDEOS

Floating Heads gliding over uneven surfaces

Surface Demon™ Sell Sheet Diamond Devil™ Catalog Diamond Devil™ Price List Diamond Devil™ Application Guide

FAQS

Surface Demon FAQ Section:

A: No, the tools are not directional.

A: Yes, replacement Diamond Cup Wheels can be purchased.

A: Yes, replacement Floating Head Assemblies can be purchased.

A: A very light scratch pattern and a surface profile in the CSP1 range.

A: You do not but, if a chemical stripper is needed to cut through heavy coatings, the tool works with it.

A: Currently 16″ thru 20″

A: Example on a walk behind: If you have a 36″ machine and it takes a set of (2) 18″ brushes, then the same is true with the Surface Demon™ Polish Prep Tool.

A: Yes, Surface Demon™ will remove light sealers and floor finishes on concrete and cementitious terrazzo without the use of harsh chemicals.

A: For concrete Surface Demon™ will remove light sealers, and for cementitious terrazzo it will remove floor sealer (up to 2 coats), floor finish (up to 5 coats), and urethan (1 coat) using only water and prepping the floor for polish.

A: Yes, for cementitious terrazzo, Surface Demon™ will remove floor sealer (up to 2 coats), floor finish (up to 5 coats), and urethan (1 coat) using only water and prepping the floor for polishing.

A: When the slurry begins to change color from transparent milky color to a dark slurry, you have reached the floor and need to stop. Rinse thoroughly and begin the Blue Grind Tool, which is the first step in the Diamond Devil® Polishing System.

A: First it is important to note that Mastic Demon® is only for use on concrete and is designed to remove mastic, glue, adhesive, thin-set, thin mill epoxy paint and more, while leaving an improved surface profile on the floor for an epoxy re-coat or for a new floor lay. On concrete, Surface Demon™ will only remove light sealers.

For cementitious terrazzo Surface Demon™ will remove floor sealer (up to 2 coats), floor finish (up to 5 coats), and urethan (1 coat) using only water and prepping the floor for polishing.

• Important Note: Never use Mastic Demon® on cementitious terrazzo floors as floor damage will occur.

A: Multiple coats beyond recommended norms can still be removed with Surface Demon™. It will take additional passes to obtain the results required to polish after that. Surface Demon™ is not designed to remove mastic, thin-set, carpet glue, epoxy, and paint (1 part or 2 part), however typical topicals like clear sealer, floor finish, urethane, etc. can be removed.

A: Surface Demon™ provides a significant advantage by mechanically stripping cementitious terrazzo using only water. However, in situations where multiple coats of topical products have built up due to inadequate maintenance, it can also be effectively used with strippers without causing any adverse effects.

A: Surface Demon™ will initially produce a white, transparent slurry when removing topicals. Once the slurry darkens and becomes non-transparent, it indicates that you’ve reached the floor and should stop.

A: Yes, Surface Demon™ sizes start at 16 inches, so dual-head scrubbers that accommodate two 16-inch tools and larger will work with Surface Demon™.

A: No, Surface Demon™ tools are not directional and can spin both ways.

A: Yes, in fact, Surface Demon™ and The Diamond Devil® polishing tools can accommodate less deck pressure than other systems (as low as 85lbs of deck pressure).

A: Yes, oversize the low-speed floor machine with a riser to bring the tool outside of the deck for easy edging. For example: Use a 20″ tool with a riser on a 20″ low-speed floor machine.

A: No, the Surface Demon™ quickly removes topicals using only water. It will initially produce a white, transparent slurry. When the slurry darkens and becomes non-transparent, it indicates that you’ve reached the floor and should stop.