Polish Tool - The Malish Corporation

Polish Tool

Closes concrete and terrazzo floors resulting in a clean, even polished finish using only water, no dangerous chemicals required.

No need to replace multiple blades that can result in damaged hardware or improper installation.

Reorder a new tool once the black nylon wear indicator is visible. Continue to use the current tool until the new one arrives.

Available in sizes: 12”-20”.

See a 5-Star Review of Diamond Devil

Diamond Devil Polish Tool

Product No.Product DescriptionRotationBlock TypeBlock DiameterUPCBlade Color# Of Blades
50612CCWPolishCCWPlastic12"6-15129-50612-0Natural32
50613CCWPolishCCWPlastic13"6-15129-50613-7Natural32
50614CCWPolishCCWPlastic14"6-15129-50614-4Natural32
50615CCWPolishCCWPlastic15"6-15129-50615-1Natural36
50616CCWPolishCCWPlastic16"6-15129-50616-8Natural36
50617CCWPolishCCWPlastic17"6-15129-50617-5Natural36
50618CCWPolishCCWPlastic18"6-15129-50618-2Natural36
50619CCWPolishCCWPlastic19"6-15129-50619-9Natural36
50620CCWPolishCCWPlastic20"6-15129-50620-5Natural36
50612CWPolishCWPlastic12"6-15129-90612-8Natural32
50613CWPolishCWPlastic13"6-15129-90613-5Natural32
50614CWPolishCWPlastic14"6-15129-90614-2Natural32
50615CWPolishCWPlastic15"6-15129-90615-9Natural36
50616CWPolishCWPlastic16"6-15129-90616-6Natural36
50617CWPolishCWPlastic17"6-15129-90617-3Natural36
50618CWPolishCWPlastic18"6-15129-90618-0Natural36
50619CWPolishCWPlastic19"6-15129-90619-7Natural36
50620CWPolishCWPlastic20"6-15129-90620-3Natural36

PRODUCT VIDEOS


Diamond Devil™ Catalog Diamond Devil™ Price List Diamond Devil™ Application Guide

FAQS

Diamond Devil™ Polishing System FAQ Section:

Q: Which tool do I start with when restoring and polishing concrete floors?

A: It is important to know what condition your concrete is in before starting.

  • How old is the concrete?
  • Has it been polished before?
  • On a scale from one to six, what condition is your concrete?
    • 1 – Pitted
    • 2 – Rough (Grind Tool – Blue)
    • 3 –Semi-smooth (Grind Tool -Blue)
    • 4- Smooth with matte finish (Hone Tool -Green)
    • 5 – Smooth with some reflection (Polish Tool – Natural)
    • 6 – Smooth with reflection (+1 Shine Tool – Red)
  • It is recommended that 6 passes are done with each tool in the system: Grind, Hone and Polish.
  • Add in the +1 Shine (Red) Tool if you want to elevate the gloss level beyond industry standards:
  • Starting with the Grind (Blue) Tool used to remove light coatings and preps floor with an open finish
  • Hone (Green) Tool used to set concrete to a honed finish, ready for polish
  • Polish (Natural) Tool closes concrete and brings out a clean satin/polished finish
  • +1 Shine (Red) Tool used to enhance and maintain your polished floors to an unmatched gloss level using only your standard floor machine

Not sure where to start?  Contact a Diamond Devil™ specialist today.

 

Q: What grit diamonds are in each tool?

A: The Diamond Devil™ Concrete Restoration and Polishing tools are not assigned a specific grit level,

as they are formulated with a proprietary diamond abrasive blend that is unique to our system.

 

Q: What is the expected life of each of the tools?

A: The life expectancy of each tool will vary depending on the condition of the concrete.

Contact one of our Diamond Devil™ Specialists to get a square footage estimate.

 

Q: Will the colored blades stain or bleed onto my floor?

A: No. the colorant in the blades will not transfer into the floor.

If you are seeing color in the slurry, that is indicative of selecting the wrong tool for the profile of the

surface. You may want to drop back to the next lowest polishing step before continuing.

If you have questions, please contact one of our Diamond Devil Specialists for assistance. 

 

Q: Which tool do I use to maintain my polished concrete or terrazzo floor?

A: For outstanding results use our natural color Polish tool.  If you are looking for an unmatched reflective

shine, we suggest using our red-colored Shine Tool.  Watch this video for more info.

 

Q: How do I know when my concrete polishing tool is worn out and it’s time to be replaced?

A: When using the maintenance tool, check wear weekly.

Check for the black wear indicator coming through on the Blade as shown in examples below:

Concrete Polishing Tool Wear Indicator 3Concrete Polishing Tool Wear Indicator 2

Q: What size tool do I purchase based on the size of my machine?

A: Auto Scrubbers will require the same size Diamond Devil™ Tool as the pad driver size recommended for the machine.

For Standard Single Disc or low-speed electric floor machines, Diamond Devil™ tools can be sized up one size from the recommended pad driver size and ordered with a 1 1/2” riser to accommodate edging.

 

Q: Are the tools directional?

A: Yes.  Typically, low-speed electric floor machines use counter-clockwise (CCW) brushes/tools. However there are few types of single disc floor machines that are clockwise (CW), so it is suggested to confirm the rotation of the machine before mounting tool.

When determining direction, do so from the operator’s viewpoint and not from under the machine. (Click here for rotational instruction video).

For dual headed auto scrubbers, typically the one side spins counter-clockwise (CCW), and the other side spins clockwise (CW) Click here for rotational instructions video.

  • NOTE: Tools are rotation sensitive, and it is imperative that the tools are mounted correctly to avoid possible tool or floor machine damage.

 

Q: How do I assure that my operator doesn’t put the directional blocks on my machine incorrectly?

A: To ensure tools are mounted correctly onto the machine, we strongly suggest that the operator view the

Rotational Instruction Video prior to mounting tools.  Once the rotation is determined, the operator should reference the label printed on top of the tool that specifies if the tool is Clockwise (CW) or Counter-Clockwise (CCW).

 

Q: What sizes are they available in?

A: Diamond Devil™ Tools are available in sizes 12″ through 20″ block diameters and fit most standard floor machines.

 

Q:  Will blade wear vary from floor to floor?

A:  Yes. Blade wear can be affected by the condition of the floor.

 

Q:  Should I use Densifier?

A:  Densifier can be used, but is not necessary when using the chemical-free Diamond Devil™ Concrete

Restoration and Polishing System.

 

Q:  Can I use cleaners during the polishing process?

A:  Yes, a neutral cleaner can be used, but we recommend using only water with the chemical free Diamond Devil™ Polishing System.

 

Q:  How can I reach the edges of my concrete or terrazzo floors?

A:  Edges can only be done using a low-speed electric floor machine (buffer type) because you can oversize tools to extend outside the machine deck, where you cannot with an auto scrubber.

Oversizing tools for floor machines require a riser. For example:  Use a 17″ tool with a 1 ½” riser and clutch plate for a 17″ deck floor machine;   A 20″ tool with a 1 ½” riser and clutch plate for a 20″ floor machine.

 

Q: How to polish a concrete floor?

A: It is important to know what condition your concrete is in before starting.

  • How old is the concrete?
  • Has it been polished before?
  • On a scale from one to six, what condition is your concrete?
    • 1 – Pitted
    • 2 – Rough (Grind Tool – Blue)
    • 3 –Semi-smooth (Grind Tool -Blue)
    • 4- Smooth with matte finish (Hone Tool -Green)
    • 5 – Smooth with some reflection (Polish Tool – Natural)
    • 6 – Smooth with reflection (+1 Shine Tool – Red)

* It is recommended that 6 passes are done with each tool in the system: Grind, Hone, and Polish.

Add in the +1 Shine Tool if you want to elevate the gloss level beyond industry standards:

  • Starting with the Grind (Blue) Tool used to remove light coatings and preps floor with an open finish
  • Hone (Green) Tool used to set concrete to a honed finish, ready for polish
  • Polish (Natural) Tool closes concrete and brings out a clean satin/polished finish
  • +1 Shine (Red) Tool used to enhance and maintain your polished floors to an unmatched gloss level using only your stand floor machine.

Note: 

The Diamond Devil™ Polishing system is not recommended for use on decorative, stained, or brushed concrete.  Polishing tools should be used only on indoor troweled concrete.

Before starting any polishing project, we strongly suggest working with one of our Diamond Devil™ specialists.  Contact a specialist today

 

Q: How can I make my concrete floor shine?

A: The Diamond Devil™ Concrete Restoration and Polishing System uses a progression of tools Grind, Hone and Polish that takes concrete floors to an even satin/polished finish.   The optional +1 Shine Tool takes the finish a step beyond, to an unmatched superior image gloss and clarity.

Note:  All Diamond Devil Tools are used on a standard floor machine or auto-scrubbers

 

Q: How long does it take to restore (grind) and polish concrete floors?

A: The time required to restore and polish concrete floors varies depending upon the condition of the concrete floor, along with the square footage.   The Diamond Devil™ Concrete Restoration and Polishing System is 3 steps -vs- the typical 6-step polishing processing.  Less steps, less time on the floor saves time and money.   Before starting any polishing project, we strongly suggest working with one our Diamond Devil™ specialists.  Contact a specialist today

 

Q: What tools do you need to polish concrete?

A: It is important to know what condition your concrete is in before starting.

  • How old is the concrete?
  • Has it been polished before?
  • On a scale from one to six, what condition is your concrete?
    • 1 – Pitted
    • 2 – Rough (Grind Tool – Blue)
    • 3 –Semi-smooth (Grind Tool -Blue)
    • 4- Smooth with matte finish (Hone Tool -Green)
    • 5 – Smooth with some reflection (Polish Tool – Natural)
    • 6 – Smooth with reflection (+1 Shine Tool – Red)
  • It is recommended that 6 passes are done with each tool in the system: Grind, Hone and Polish.
  • Add in the +1 Shine Tool if you want to elevate the gloss level beyond industry standards:
    • Starting with the Grind (Blue) Tool used to remove light coatings and preps floor with an open finish
    • Hone (Green) Tool used to set concrete to a honed finish, ready for polish
    • Polish (Natural) Tool closes concrete and brings out a clean satin/polished finish
    • +1 Shine (Red) Tool used to enhance and maintain your polished floors to an unmatched gloss level using only your stand floor machine

REVIEWS

“I would rate the Diamond Devil™ Shine Tool a five, being the best product that I found out there on the market. It saves us time and energy with the manpower here, and it’s also a safer process.”

-Paul Rooney

“I can’t rate the Diamond Devil™ Shine Tool from one to five, because “it’s a 10.”

 

 

-Jeff LaFlair

“We were looking for a shine, but we weren’t expecting this kind of shine.”

 

 

-Justin Boggs